Best Night Vision Goggles & Devices (Review & Buying Guide) in 2023

Dec 19, 2023

I spy with my little NODS everything that happens after sunset.

Binocular NODS are a choice. If you have the means, I highly recommend picking some up.

The preferred night vision of the U.S. military is a good place to start. This monocular is the most cost-effective entry into quality night vision devices.

How do you make a great product even better? Make it tough as nails. These are built with the assumption that you’re going to beat the hell out of them.

We may earn revenue from the products available on this page and participate in affiliate programs.

The first time I got issued night vision in the Marine Corps, I felt like a true badass. With my trusty NVG and motivated M249, I would own the night harder than the grim reaper with insomnia. That magical little PVS-14 would unlock the darkness like a video game cheat code and leave the enemy nowhere to hide.

Except none of those things turned out to be true. My first training evolution was to simply walk a marked path through the woods, and even that proved damn near impossible. I kept tripping over roots, gouging my face on branches, and waving my arms in front of me like a cartoon mummy.

If you’re new to night vision, you should expect a similar learning curve. In addition to the challenges I faced, you’ll have to come up with a four-figure stack of dollar bills to fund the experience. But, like those before you, you’ll get the hang of it. Call it what you want — night vision, NVG, or NODS — being able to see in the dark is a total game-changer.

We know a thing or two about working with night vision and we enlisted the help of some of the industry's best to make sure you not only know what products are available, but also what kind of information should guide your buying decision, and how to get the most out of your investment.

SEE IT

The advantages of something like the TNV DTNVS over a monocular NVG are just too significant to ignore. If you can afford to jump into the deep end of night vision devices, we can't recommend these highly enough — especially if you plan on doing more dynamic activities like running, driving, or working with your hands.

The U.S. military started using this device's predecessor in 2016. After four years of standout performance, TNV updated the platform to create the DTNVS you see here. This system isn't just compliant with MIL-STD-810G and U.S. Special Operations Command test protocols; it exceeds them by double the required outcomes. All the magic happens inside Gen-3 autogated MX-10160 tubes. As we’d expect from a product this high-end, there's some room for customization to suit your needs. Thin-filmed green phosphor and unfilmed white phosphor are both available and sourced from L3Harris. The 40-degree field of view and 10-inch minimum focus distance are standard for this kind of equipment. What's not standard is the weight of fewer than 18 ounces, which isn't far from what many monocular devices weigh.

The tubes can be adjusted for proper alignment and a diopter allows them to be focused separately to account for any disparity between your eyes. One nice touch is an indicator light that reminds you when your IR illuminator is on so you don't walk around looking like a lighthouse to everyone else with night vision. This setup is superior to a dual PVS-14 rig, but the controls are very similar and many PVS-14 accessories are compatible. That's a nice perk considering the amount of aftermarket support that unlocks.

There are really only two drawbacks to these NODS. One is the price — even though it's justified, this is a big chunk of change, so you better have plans to put these things to use if you’re going to get your money's worth. The other is a relatively short battery life of 25 hours — and the fact that it comes from a CR123 battery that's less common than AA. Many binocular setups last around 30 hours on a single battery, so the difference isn't huge, but it exists. Considering everything else these NODS excel at, we’d be content to throw an extra CR123 in our pack and move on.

Depth perception supports natural movement

Upgraded version of the military model introduced in 2016

Weighs as little as some monoculars

Housing and tube options available

Limited battery life

Price-prohibitive for many users

Old-school users might balk at automatic gain adjustment

SEE IT

There are times when "mil-spec" means every corner available was cut to win a government contract, and there are times when it means a piece of gear is seriously good. The PVS-14 has been a military mainstay long enough for us to know that it's a rock-solid piece of gear that can survive not only the darkness, but also abuse at the hands of service members in the field.

If you’ve partaken in a military exercise after dark at any point during the last 20 years, you’re probably familiar with the PVS-14. This monocular is known for its reliability, ease of use, and ability to take a beating. This one uses a Gen 3 variable gain intensifier and thin-film green phosphor. Other standard features include manual gain control, a 40-degree field of view, and power from one AA battery. We recommend mounting this NVG to a helmet, but it can also be used freehand or on a weapon. It is recoil-rated for 5.56. A bump helmet (meaning non-ballistic) and all the required accessories can be added to your purchase to create a one-stop solution.

How is this PVS-14 so affordable? For starters, these are tubes that have been marked as blemished. That means there will be one or more dead spots that appear as black specs of varying sizes. U.S. Night Vision selects tubes with blemishes that don't significantly impede performance for this discount, though, and example images are included on the product page so you can get an idea of what you’re getting into. We’d obviously prefer not to have any blemishes but, at this heavy of a discount, we can't complain too much. You can also take comfort in the fact that your purchase is backed by a two-year warranty from U.S. Night Vision.

Considering everything it's capable of, landing a reputable, American-made, warrantied PVS-14 with an MSRP of $3,200 seems like a bargain. Finding one on sale for less than $2,600 is too good to pass up.

Compliant with OMNI VIII military specifications

Waterproof to 60 feet for two hours and very durable

Huge selection of aftermarket accessories

Battery lasts up to 50 hours

Monocular does not provide depth perception

Steeper learning curve than binocular NODS

Only recoil-rated for 5.56 weapons

SEE IT

The TNV DTNVS and U.S. Night Vision PVS-14 are such solid picks that it was hard to find something other than an absurd quad-tube setup to include alongside them. Nevertheless, TNV landed another winner by taking an already popular product and beefing it up even more to create the Ruggedized Night Vision Goggle. We’re all for investing in products that don't need to be babied, so this was an easy pick.

The tubes are manufactured by AB Night Vision and sent to TNVC for final assembly as a dual-tube setup. Take your pick from L3Harris’ third-generation thin-filmed green phosphor or unfilmed white phosphor. Housings can be ordered in black or flat dark earth. The 40-degree field of view and 10-inch minimum focusing distance are par for the course, but automatic gain control is a nice upgrade. Power comes from a single CR123 battery and lasts 30 hours at room temperature.

Night vision devices are typically built from a durable polymer that strikes a balance between weight, strength, and cost. The RNVG uses tubes machined from billet 7075 aluminum and anodized to resist the elements. Cerakote finishes can also be added (and look awesome). This material is stronger than many steel alloys and nearly as light as polymer. Every moving component has been enlarged to add strength. Exposed wires have been replaced with an electrical contact strip that allows easy adjustment without hanging delicate wires out to get snagged. The whole system is submersible to 66 feet, like most NODS in this price range.

The reality is that, for most people, the standard polymer housings used by militaries, law enforcement agencies, and civilians around the world are perfectly adequate. Still, it's nice to get a little extra peace of mind when spending this kind of money. Take the solid aluminum, reinforced connections, and lifetime system warranty (10 years on image intensifiers) into the abyss with confidence.

A tougher version of an already pretty tough product

Contact strips replace exposed wires

Controls are similar to those of the PVS-14

Filled with top-shelf components

Optional Cerakote is basically obligatory

Excessive in most situations

Is the rest of your gear this durable?

SEE IT

If there's one thing we’re left wanting from most NODS, it's long-distance performance. Using an IR laser aiming system is super fast and intuitive at short distances, but its utility falls off precipitously as range increases. Ambient light can also make it hard to pick up a laser in your NVG. To overcome that, you’ll need a dedicated shooting optic like the Bering optics D760 Gladius.

This six-power magnified optic uses a third-generation L3Harris image intensifier tube paired with your choice of filmed green phosphor or unfilmed white phosphor. Gain control is manual and the mil-dot reticle can be switched between red or amber. Turret adjustments are made at a rate of 1/4-mil per click. With quality components and a 165-millimeter objective lens, you’ll get an impressive, crisp image. Green phosphor units are recoil rated up to 7.62×51 and white phosphor units are recoil rated up to .50 BMG. Detection of man-sized targets is possible as far out as 1,100 meters and target identification is possible at 400 meters. Try that with a PVS-14.

The D760 is a high-dollar scope, but the quick-release mount can be disengaged to remove it from your primary rifle and return it to daytime readiness. TNVC claims that it will hold your zero when reattached in the same position, so you don't need to have separate rifles for day and night. Between the magnification, eight-degree field of view, and two-pound weight, this scope is intended for stationary use rather than running and gunning. Stick to what it's good at, and you will be very, very happy.

Six-power magnification for longer precision night shooting

Available with white or green phosphor

Unfilmed white phosphor scopes are weapon-rated up to .50 BMG

Mil-dot reticle can be switched between red-on-green and amber-on-green

Not for use independent of a weapon system

Relatively limited functionality compared to helmet-mounted NODS

Considerably larger than many six-power scopes

SEE IT

We know that all of you are stone-cold operators — nobody is questioning that. But if for some reason someone you know just wants to see what the heck is going on after lights out without looking like an action hero and mounting IR lasers on every weapon they own, we have the perfect product for them. The four- to 16-power ATN BinoX offers considerable night vision capabilities at a fraction of the cost of tactical NODS.

Unlike the rest of the options on this list, the BinoX uses digital rather than analog technology, and that comes with impressive advantages. Dual 720 displays provide a clear view, and a built-in IR illuminator increases visibility after dark. Images appear in black and white at night and in full color during the day. It also means that these binoculars can overlay information on top of what you see, including distance via the rangefinder, cardinal direction, degrees of incline or decline, battery life, and the strength of Wi-Fi signal.

That's right, these binoculars can be connected to your phone and even share information among users. You can use your BinoX to mark a point and share that point with someone else, who will see it highlighted on their display when they look at it. The app will allow you to see a map with the position of other BinoX users and any points that have been marked. You can even record what you see in 4K and 120 frames per second.

The downside of digital night vision is a reliance on infrared illumination in darker environments. On an overcast night or under heavy tree cover, you’ll need the BinoX infrared light to see well. That isn't a problem during recreational use, but it's a tactical liability. If you never plan to mount your night vision to a helmet or weapon, though, this is as close to science-fiction as you’re likely going to get for a while.

No accessories required; can be used as-is

Digital display allows overlay of useful information

Can be used day or night

Take pictures and record 4K video

Handheld only; can't be mounted to a helmet or weapon

Narrow field of view

Doesn't perform as well as analog night vision in total darkness

Bringing you the best gear money can buy is a full-time job for the Task & Purpose crew. We’re always very careful about making recommendations involving your hard-earned money, especially when we’re dealing with a financial commitment as serious as a night vision device and everything that goes along with it. We realize that for many of you, an optic alone could be a month's salary. On top of that, this is equipment that you could rely on to save your life at some point. That weighs heavy on us, and we take personal responsibility for bringing you only the best products out there.

Before you start throwing money at a night vision setup, we recommend familiarizing yourself with the technology available in the context of your own needs. Augee Kim, vice president at Tactical Night Vision Company, had some good advice when we talked to him.

"Generally speaking, when we talk to customers, our advice is to balance requirements with budget," Kim said. "While obviously everyone always wants the best, night vision is not inexpensive, and a realistic budget is very often an important factor. This advice applies to both commercial and government/law enforcement customers.

"Long story short, customers should ask themselves: ‘What do I want/need to do?’ and ‘How much can I realistically spend for these capabilities?’ To me, this is the most important and critical — and, sadly, overlooked aspect of night vision buying — so many people are dazzled by what is popular on social media, or what special operations is using, etc., and don't think as critically about their own needs and requirements, and let that drive their purchasing decisions.

"From there, we can get into a whole lot more detail, and one of the things that TNVC excels in is consulting with individual users about their requirements and what products are available to meet those requirements within their budget and being able to provide a tailored solution to meet their needs."

The vast majority of night vision devices will end up on a helmet. We say helmet-mounted rather than head-mounted because strapping a device to your head just isn't stable enough for real-world use. Even if you don't spend big bucks on a ballistic helmet, having a rigid, stable foundation will make all the difference.

The interface between your helmet and night vision device starts with the hard shroud that will mount directly to the front of your helmet. Think of it as a low-profile quick release. That's where you’ll clip in your mounting system. Finally, an arm will attach to your NVG. If you want to make things easy and cost-effective, U.S. Night Vision has packaged everything you need (including a laser) at a heavy discount right here. All that gear is fairly heavy, so some people like to add ballast weight (or better yet, a remote battery) to the back of their helmet to balance the load. It's heavier that way, but at least the force is coming straight down and not yanking your face toward the deck.

It's a lot of information to take in. Planning out the right setup for you will take time and it's important to get it right. Once you’re done, you can buy with confidence knowing that you have quality gear that's backed by a warranty and will come through for you when you need it most.

Going handheld is by far the cheapest way to enter the night vision arena. If you want to see in the dark without role-playing your favorite YouTube operator, you can get by with a basic digital night vision monocular or binoculars like the ATN BinoX.

These devices are not compatible with weapons, so nights at your local shooting range are out of the question unless you just want to creep from the peanut gallery. They’re also lousy for moving, so get used to being in a static position. If you’re good with those drawbacks, you can absolutely use these devices to observe your surroundings. They can be very useful for hunters who sit in a hide and scan for predators or hogs until it's time to switch to the next type of night vision device on our list.

You would-be Ricky Recons out there might be wondering to yourself, "If all I want to do is shoot in the dark, why do I need all this high-speed mobile gear?" The answer is that you don't. Plenty of hunters set up and call in predators at night, and they’re taking (relatively) known-distance shots from a static position. Oftentimes, they’re reaching out far beyond what anyone with NODS and a laser would attempt.

What you need in that kind of situation is a night vision scope. Something like the Bering Optics D760 Gladius can provide a six-power magnified, illuminated image. That's enough power to make precision shots at serious distances for nighttime shooting. Another option is to pair a clip-on night vision device like the Knight's Armament UNS-A3 with your existing, compatible optic.

Digital night vision is improving in leaps and bounds, but it hasn't earned the same wide acceptance as analog night vision. They work just like a mirrorless digital camera, meaning a sensor creates an image that you see on a screen. The quality of the sensor and screen both present bottlenecks that limit the quality of the image you see. There can also be noticeable lag that's obviously not great. On the plus side, digital night vision devices allow you to overlay GPS information and record photos and video. They’re often less expensive than analog alternatives, but we’d still prefer the old-school tech for now. T.Rex Arms has a fantastic breakdown of the differences if you want to really nerd out.

Most people end up buying a single-tube night vision device out of financial necessity. Options like the PVS-14 have been around for decades and used examples are readily available (more on that in the pricing section). Like many other service members, this is what I used back in the day. Which eye you use is situation-dependent and personal preference, so see what works best for you. Your best bet is to buy a mount that can be flipped from side to side so you can switch on the go. Either way, training is necessary because your depth perception is going right out the window without substantial ambient light, and you’re going to feel like a drunk in a house of mirrors at first.

Binocular night vision devices solve this problem by giving each eye a bright, clear view of the world around you. As a result, you’ll experience depth perception that lets you move much more naturally — hence, the significant jump in price. Because the two tubes are (typically) mounted parallel with a high degree of overlap, the field of view isn't noticeably improved over what you get from a monocular. There are also (extremely expensive) quad-tube setups available if you want a wider field of view. Just be aware that they’re also significantly heavier.

The staff at TNVC recommend upgrading to binocular units when possible, especially as the complexity of your operations increases.

"Binocular units offer superior depth perception as well as binocular summation which can aid in detection, and being more natural to use, they can have a psychological effect that allows users to remain more clear-headed in high-stress scenarios and complex environments," Kim said. "This is not to say that these things can't be done with a monocular — they can — but in many cases, a binocular will be better and easier."

We should point out that it's possible to create your own setup with a bridge and two monoculars, but that's a bit like welding two motorcycles together and calling the result a car. Because it's difficult to precisely calibrate the tubes to each other, you’ll likely experience dizziness and headaches in short order. Basically, your eyes will be giving your brain conflicting information and the poor thing is just going to short-circuit until your stomach offers your most recent meal as tribute.

When you picture what night vision looks like, you’re probably imagining a world of green and black hues. That's because green phosphor has been around for decades and it's what we’re used to. It works, it's easy on the eyes, and it's readily available.

Some newer devices come with white phosphor, which actually produces a slightly blue tint. Some people prefer this style because it creates less eye strain and they feel like they see better with it. If you’re one of those people, by all means, buy white phosphor. The color is ultimately far less important than the technology behind it, so buy the most recent generation of night vision you can afford and then prioritize color.

Gen 1: In the beginning, there was only darkness (and the bodies of people who ran around the battlefield with flashlights). The first night vision technology saw action as early as the 1930s — but not in the way you think.

"Photocathodes were used for way more than night vision," Isaac Botkin said in a video for T. Rex Arms. "They’re how every video camera ever worked at the very beginning of the early days of television."

This technology was used during World War II and the Korean War, but it wasn't until the U.S. began fighting in Vietnam that Gen 1 night vision came into play.

Inside the tube of a Gen 1 night vision device is a photocathode that converts visible and infrared photons into electrons. A phosphor then causes all of those electrons to glow, creating a visible image that combines the power of the visible and infrared spectrums. To be effective, these systems needed infrared illumination to work in the absence of adequate ambient light.

Gen 2: During the 1970s, night vision technology saw the addition of a microchannel plate that multiplied the incoming electrons. This resulted in a much brighter image that could be used without an IR light. Since carrying around an IR searchlight was no longer required, night vision became a much more viable option for military use.

Gen 3: Improved photocathodes developed in the 1980s brought about the third generation of night vision devices. Individual components are more effective, allowing each stage of the process to be executed with greater efficiency and compounding results. The bad news is that, since the birth of Gen 3 night vision, technological improvements have gotten progressively smaller. What we’re using today is very similar to what was available 40 years ago, and the founding principles are about a century old.

Gen 4: It's not a thing. It is fake news. During the 1990s, the U.S. Army experimented with upgrades that appeared to be the next step in night vision technology, but high failure rates ultimately spelled the doom of Gen 4 night vision for the time being. Anyone trying to sell you a Gen 4 night vision device is probably referring to high-end Gen 3, and a bit of skepticism is justified.

Digital night vision: What isn't fake is digital night vision. This approach uses the same sensors found in digital cameras to provide an image on a tiny screen inside the eyepiece. There are advantages and disadvantages but, in most real-world scenarios, digital night vision devices are not able to compete with analog alternatives right now. We expect this technology to have its heyday, but it isn't here quite yet.

You know what we call a high-dollar night vision device that flops around when you’re trying to use it? Useless. Before you blow your budget on night vision, make a shopping list that includes not only the device, but also the mount, helmet, and accessories like a battery pack or counterweight. More adjustability is always better, so don't cheap out on this stuff. And always dummy cord everything to everything else.

Garand Thumb has a nice breakdown of the basics, so give his video a look.

Everybody buys night vision devices for the same reason: to own the night. Reality is probably closer to a lease on a 40-degree section of the night for the lifespan of your battery, but we appreciate the enthusiasm. With enough practice, you can absolutely turn darkness into a huge tactical advantage. There's a reason night vision capability was considered one of the biggest disparities between U.S. and Iraqi forces during the Gulf War.

As always, there is a big difference between having night vision and having night vision capability. We’d rather work alongside people who have basic monoculars and thousands of hours of training than people who pulled the latest and greatest quad tubes out of the box an hour ago.

We’re willing to go out on a limb and assume that you aren't interested in night vision because you want to sit in the dark and watch the mushrooms grow. No, you probably have tabs open for night vision, an IR laser, and some kind of compatible red dot right now. The good news is that night vision can be integrated into your weapon system extremely effectively.

Your first option is a passive setup. With this method, you’ll sight in with your optic just like you normally would, except with a night vision device between your dominant eye and the optic itself. Lining the two up can be tricky, so you’ll need to practice. This approach also leaves you with an extremely limited field of view, so your situational awareness will take a big hit any time you go to sights. Finally, make sure that any kind of electronic optic is compatible with night vision (like these). A red dot that's too bright will blow out your view the same as looking directly into a flashlight would.

Most people prefer active setups. This approach replaces your daytime optic with an infrared laser like the military's PEQ-15 or civilian options like the L3Harris ATPIAL-C and Steiner OTAL. Instead of looking through your sights, you can just shoulder your weapon, keep your head upright, and place the (visible to you) laser on the target. This method also takes practice, but is generally much faster in execution and relatively easy to learn.

Another option is mounting your night vision directly to your rifle in the form of a night vision scope or clip-on night vision. These are great for stationary shooters who need to shoot longer distances. This type of setup is popular with predator hunters, hog hunters, and designated marksmen.

Using any kind of night vision device takes practice. Using it with a weapon takes even more. Using it as part of a team is a continuous process. If you and a few buddies plan on taking on the zombie apocalypse as a unit, you’d better get some hands-on training before the undead sprout from the ground. Can you all function independently? Can you move as one? Can you use your equipment to communicate effectively? Keep coming up with questions and exercises to test yourselves.

One advantage of teamwork is being able to spread the cost. We recommend helmet-mounted night vision over weapon-mounted devices, but if you work as a team, there's no reason you can't designate one person with an SPR, DMR, or bolt rifle to be your distance shooter with a weapon-mounted setup. While the rest of you move with your monocular or binocular mounted rigs, that person can provide overwatch from a stationary position that takes advantage of their device's unique capabilities.

There's a great scene in "13 Hours: The Secret Soldiers of Benghazi" that illustrates how members of a team can use night vision to understand a rapidly changing situation, communicate what they see, identify targets, and use the darkness to their advantage. The possibilities are endless, so work together to find what works for your group. Then practice until it's boring.

Of course, you can only take advantage of all these benefits if you train with your equipment. Swiping your credit card and putting NODS in the closet doesn't give you ownership of the dark. In our conversation with Kim, he drove this point home and offered some great pointers.

"I always recommend some sort of professional training with experienced end-users," he said. "We at TNVC have an in-house Training & Education division and provide both open and closed enrollment classes, and we are one of, if not the only entity that can assist users from having no night vision knowledge whatsoever to generating requirements, product selection, lifecycle support, and basic and advanced training to create operational capability — all under one roof. However, there are many companies that provide good training.

"While ‘Get professional training’ is a common refrain in our industry, for night vision specifically I think it can be hugely important and help reduce the learning curve. As I’ve alluded to, there's a lot of information as well as misinformation out there, and the reality is that many people have limited exposure to the technology and equipment prior to purchasing. Professional training can help kickstart your learning and give you a much better baseline than trying to go it alone by trial and error. As a matter of fact, our training program not only offers rental equipment, but we also have a Try Before You Buy program which we often encourage people to attend before they make purchasing decisions to allow them to be better informed about their needs.

"In terms of non-professional training, one of the big things I would recommend is to get accustomed to doing things by feel and without looking at them — night vision is an awesome capability, but one of its limitations is the fixed focus — unlike our eyes, night vision does not allow you to quickly switch between near and far focus, which in practice tends to mean that anything within about six feet will be blurry and out of focus.

"This means you need to be able to do things like weapon manipulation, magazine changes, and activating (and, if applicable, mode-switching) on accessories like lights and lasers largely by feel rather than sight. But it also involves more simple and mundane tasks like tying shoes, eating and drinking food, and opening doors. In our training classes, often one of the biggest takeaways for students is how little they’ve realized how dependent on sight they’ve been.

"A good little exercise I recommend is kicking a ball against a wall (slowly, of course), which again, seems simple, but is great skill-building. You will be able to see the ball move in and out of focus as it gets farther and nearer. It will develop your depth perception as well as your hand/eye (goggle) coordination, working within the limited field of view, etc., as you try to connect with the ball and learn to judge, and — in many cases — re-learn some skills you tend to take for granted during the day with your natural vision."

Most of the products we recommend cost more than $3,000, but there are cheaper options available. These are often used, blemished, or come from questionable sources. As tempting as it may be to pay half price, that may not actually save you money. Reputable sellers like TNVC and U.S. Night Vision have frequent encounters with people who learned that the hard way.

"Just recently, we received a unit that a customer had purchased used under the belief that the image intensifier tubes were one thing, however when we received it and opened it up to do some repairs, we found that the tubes were not what had been advertised," Kim said. "That's a common story. Beyond that, in many cases, you have no idea of the level of skill of the builder, the source of the parts, if they’re the right parts, or even if they are using all of the parts in some cases — it's happened, we’ve seen it all. Finally, with a reputable vendor, you usually get access to some sort of warranty or after-purchase support that is unlikely from an anonymous eBay source. At TNVC and Night Goggles we have a Lifetime Limited Warranty on all of our TNV and NGI branded systems."

If you have your heart set on night vision but don't have tactical applications in mind (or at least as your primary motivation), a set of handheld binoculars like the ATN BinoX can be a good solution. You’ll gain the ability to see in the dark, but forego mobility and integration with your weapon system. Discounted units like the PVS-14 we found at U.S. Night Vision are also an option.

This is generally where we recommend doing your shopping. Is it possible to spend less? Absolutely, but the practical utility of those products is fairly limited and if you’re investing in night vision, you’re probably pairing it with a rifle, body armor, and other equipment that you’d use in situations where saving money isn't exactly your top priority.

At the bottom of this price range, you’ll be shopping the used third-generation PVS-14 market. Quality and prices can vary wildly, so be very diligent in doing your homework so you know what you’re getting and why it's priced the way it is. Expect blemishes and degradation that come from years of use at the hands of people who didn't pay for it and may not have the most thorough understanding of the equipment.

Spending $3,000 or more will open up the world of quality, new night vision monoculars. This is where you can find new PVS-14s and products like the TNV Mod3 Bravo, which is intended to be used in a dual-tube setup but can be purchased individually as a monocular.

The latest technology and features all cost north of $5,000 and prices escalate drastically. A solid set of binocular night vision goggles will run you anywhere from $7,000 to $14,000. If you want to see the world through four tubes like the very highest-speed and lowest-drag operators, you’ll need to shell out more than $40,000 and wait several months for fulfillment.

As a general rule, you should match your equipment to the task at hand. If you’re hunting coyotes or hogs on your farm, fancy binocular NODS are probably more of a want than a need. If you’re outfitting a military or law enforcement team in preparation for kinetic environments, it's worth stepping up to more advanced equipment.

This gear guide was a serious undertaking, so we started by circling the wagons and combining our collective knowledge. We drew from collective experience in the military, law enforcement, firearms sales, and firearms journalism. We consulted leading experts to get a better understanding of what goes into night vision technology and how customers can be best served by various products. Of course, we also binge the same videos and articles you do. The resulting list is a selection of night vision products that knock value and performance out of the park. There are no knock-offs, questionable tubes, or too-good-to-be-true imitators here; just night vision devices we’d personally trust our lives to in the darkest hour. All of them feature third-generation or digital technology and are backed by a solid warranty.

You’ve got questions, Task & Purpose has answers.

A: We hate to break it to you, but the PVS-14 we recommended is affordable night vision. Cheap night vision might technically allow you to see in certain low-light situations, but it isn't usable in any kind of training or tactical environment.

A: Binocular night vision goggles mount to a helmet and use one tube for each eye to create lifelike depth perception and field of view. Night vision binoculars are devices that are used by hand rather than mounted to a helmet. The latter are often capable of magnification similar to traditional binoculars.

A: The PVS-14 is widely used by the U.S. military and NATO forces. Jobs that require enhanced night vision capabilities (think pilots, special forces, and the like) use binocular night vision goggles that allow depth perception, a wider field of view, and better image quality. The next generation of night vision technology looks like something out of a science fiction movie.

Scott Murdock is a Task & Purpose commerce writer and Marine Corps veteran. Since 2020, he's selflessly committed himself to experiencing the best gear, gadgets, stories, and alcoholic beverages in the service of you, the reader. Contact the author here.